Order Products : sales@su-jiao.com

Teflon® PTFE 807N X

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	DuPont Fluoropolymers
Trademark:	Teflon® PTFE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1xtl3v_Teflon-PTFE-807N-X.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Teflon ® PTFE 807N X is a free flowing PTFE granular resin designed for compression or automatic molding and ram extrusion (low back pressure). It offers an excellent combination of properties that are characteristic of Teflon ® fluoropolymer resins:

chemical inertness,

exceptional dielectric properties,

heat resistance,

toughness and flexibility,

low coefficient of friction,

non-stick characteristics,

negligible water absorption,

excellent weather resistance.

Teflon ® PTFE 807N X is a multi-purpose PTFE resin which yields high productivity due to its high fill density. It is easy to process, handle and machine. It also has excellent end-use properties.

Typical Applications
Can be fabricated into billets for skived tape, basic shapes and moldings. It can be used for applications such as:

seals,

valve seats,

bearing pads,

linings,

gaskets,

electrical/electronic parts.

General Information
Features	Food Contact Acceptable Good Chemical Resistance Good Electrical Properties Good Flexibility Good Processability Good Toughness Good Weather Resistance Low Friction Low Moisture Absorption Machinable Medium Heat Resistance Solvent Resistant
Uses	Bearings Electrical Parts Gaskets Liners Seals Tape Valves/Valve Parts
Agency Ratings	EU 10/2011 FDA 21 CFR 177.1550
Forms	Granules
Processing Method	Compression Molding Extrusion Ram Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.16	g/cm³	ISO 12086, ASTM D4894
Apparent Density	0.90	g/cm³	ASTM D4894, ISO 12086
Water Absorption
Equilibrium	< 0.040	%	ASTM D4894
Equilibrium, 23°C, 50% RH	< 0.040	%	ISO 12086
Average Particle Size	550	µm	ISO 13320-1

Thermal	Nominal Value	Unit	Test Method
Thermal Instability Index
--	5.00		ASTM D4894
--	5.00		ISO 12086

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(0.130 mm)	33.0	MPa	ASTM D4894, ISO 12086
Tensile Elongation ²(Yield, 0.130 mm)	320	%	ASTM D4894, ISO 12086

Thermal	Nominal Value	Unit	Test Method
Melting Temperature			ASTM D4894, ISO 12086
-- ³	327	°C
-- ⁴	344	°C

Note Message
1 .	Measured on skived tapes
2 .	Measured on skived tapes
3 .	Second
4 .	Initial

Resin Grade	Manufacturer	Category	Trademark
Santoprene™ 101-55	ExxonMobil Chemical	TPV	Santoprene™
Starex TX-0520	SAMSUNG SDI CO., LTD.	MABS	Starex
VINIKA® D6337	Mitsubishi Chemical Performance Polymers, Inc.	PVC, Rigid	VINIKA®
ELASTOSIL® N 291	Wacker Chemie AG	Silicone	ELASTOSIL® N
LEXAN™ LUX2910T_ resin	SABIC Innovative Plastics Europe	PC	LEXAN™