Order Products : sales@su-jiao.com
SureSpec LLC4-500
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1vyGFQ_SureSpec-LLC4-500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLC4-500 is a certified prime grade, containing Butene-ethylene copolymer designed for High-Flow INJECTION MOLDING of thin-walled high quality applications. LLC4-500 features superior processability over a wide range of molding conditions, fast cycle times, very good rigidity, high gloss surface, low temperature toughness, and warpage free moldings. LLC4-500 applications include housewares, margarine tubs, small to medium containers, trash cans, toys, and multicavity lids, closures and caps, where excellent toughness, good impact strength and high gloss are required. Recommended processing temperature is 170 to 210°C., with mold at 20 to 40°C. LLC4-500 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 55 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, F50) | 5.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 13.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 100 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 517 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 52.5 | kJ/m² | ASTM D1822 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 210 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTAMID® L X7166 | Evonik Industries AG | Nylon 12 | VESTAMID® L |
| TYNAB® LG30 | Tyne Plastics LLC. | ABS | TYNAB® |
| Cri-Line LC-508-55 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| Fainplast PVC ARC 20 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Paracril® X3675 | INSA | NBR | Paracril® |
