Order Products : sales@su-jiao.com
Kemcor LD 4200 (INJECTION)
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1vKWeA_Kemcor-LD-4200-INJECTION-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 to 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 43 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 9.00 | MPa | |
| Break | 12.0 | MPa | |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 240 to 270 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® PBT 700/1.5 HR GF15 PTFE15 | ALBIS PLASTIC GmbH | PBT | ALCOM® PBT |
| DURANEX® 700FP | Polyplastics Co., Ltd. | PBT | DURANEX® |
| ELASTOSIL® 7000 N | Wacker Chemie AG | Silicone | ELASTOSIL® |
| EMLON® 6 GFR 30 | EMAS Plastik San.Tic.AS. | Nylon 6 | EMLON® |
| Braskem PP CSP120NA | Braskem America Inc. | PP Impact Copolymer | Braskem PP |
