Order Products : sales@su-jiao.com
SOLLAMID B 2700 - B 2710
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Krisoll Resinas Plásticas Ltda. |
| Trademark: | SOLLAMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1uKhGg_SOLLAMID-B-2700---B-2710.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SOLLAMID B 2700 - B 2710 is a Polyamide 6 (Nylon 6) material. It is available in Latin America. Primary attribute of SOLLAMID B 2700 - B 2710: Flame Rated. |
| General Information |
|---|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.14 | -- | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 15 to 35 | -- | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.2 to 1.6 | -- | % | |
| Water Absorption (23°C, 24 hr) | 1.5 | -- | % | ASTM D570 |
| Heat Stability | 80 | -- | °C |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale, 23°C) | 120 | 103 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 2900 | 1100 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 75.0 | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 50 to 100 | 250 to 300 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2800 | 1000 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 95.0 | 40.0 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Unnotched Izod Impact (23°C) | 55 | 140 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 180 | -- | °C | |
| 1.8 MPa, Unannealed | 65.0 | -- | °C | |
| Melting Temperature | 214 to 220 | -- | °C | |
| CLTE - Flow | 7.0E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | -- | ohms·cm | ASTM D257 |
| Dielectric Strength | 21 | -- | kV/mm | ASTM D149 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Menzolit® SMC 0410 | Menzolit Ltd (UK) | Polyester, TS | Menzolit® |
| Axiall PVC 2192 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| HANWHA LDPE 963 | Hanwha Chemical | LDPE | HANWHA LDPE |
| Honeywell PMP R1180 | Honeywell | PMP | Honeywell PMP |
| Sylvin 83002-73 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
