Order Products : sales@su-jiao.com
Generic HPPA - Glass Fiber
| Category: | HPPA , High Performance Polyamide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1t5vs4_Generic-HPPA---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic HPPA - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage (23°C) | 0.010 - 0.50 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 16500 - 21000 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 1.8 - 3.8 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 15000 - 19100 | MPa | ISO 178 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 100 | °C | |
| Drying Time | 7.0 - 8.0 | hr | |
| Suggested Max Moisture | 0.090 - 0.10 | % | |
| Processing (Melt) Temp | 285 - 324 | °C | |
| Mold Temperature | 95.0 - 143 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic HPPA - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen Q30G | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
| Axiall PVC 9109J Clear | Axiall Corporation | PVC, Rigid | Axiall PVC |
| Daelim Po1y® LD-01A | DAELIM INDUSTRIAL CO., LTD. | LDPE | Daelim Po1y® |
| Gravi-Tech™ GRV-UR-075-W-BLK | PolyOne Corporation | TSU-Ester | Gravi-Tech™ |
| WELLAMID Nylon 6600 GV 30 HYCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
