Category: | PP+EPDM , Polypropylene + EPDM Rubber |
Manufacturer: | Polykemi AB |
Trademark: | POLYfill |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | 1rvOYR_POLYfill-PP-EIP16020-F.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Mineral reinforced Low CLTE |
General Information | |
---|---|
Filler / Reinforcement |
|
Features |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 1.04 | g/cm³ | ISO 1183 |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 16 | g/10 min | ISO 1133 |
Molding Shrinkage | ISO 294-4 | ||
Across Flow | 1.0 to 1.2 | % | |
Flow | 1.0 to 1.2 | % |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress | 20.0 | MPa | ISO 527-2 |
Tensile Strain (Yield) | 6.0 | % | ISO 527-2 |
Flexural Modulus (23°C) | 1700 | MPa | ISO 178 |
Flexural Stress | 34.0 | MPa | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Charpy Notched Impact Strength | ISO 179 | ||
-20°C | 3.0 | kJ/m² | |
23°C | 10 | kJ/m² |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Heat Deflection Temperature 1(1.8 MPa, Unannealed) | 65.0 | °C | ISO 75-2/A |
Vicat Softening Temperature | 145 | °C | ISO 306/A50 |
Flammability | Nominal Value | Unit | Test Method |
---|---|---|---|
Flame Rating (1.60 mm) | HB | UL 94 | |
Glow Wire Ignition Temperature (2.00 mm) | 750 | °C | IEC 60695-2-13 |
Note Message | |
---|---|
1 . | 120°C/hr |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
POLYPRO® 6019 | YUHWA Korea Petrochemical Ind. Co., Ltd. | PP Random Copolymer | POLYPRO® |
SEETEC EVA VS420 | Lotte Chemical Corporation | EVA | SEETEC EVA |
Skyrol® SH92 | SKC Inc. | PET | Skyrol® |
ELASTOSIL® RT 705 | Wacker Chemie AG | Silicone | ELASTOSIL® RT |
VALOX™ 420 resin | SABIC Innovative Plastics | PBT | VALOX™ |