Order Products : sales@su-jiao.com

Pinnacle PP 4220H

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1kNd3z_Pinnacle-PP-4220H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

20 MELT FLOW ULTRA HIGH IMPACT COPOLYMER FOR INJECTION MOLDING

Pinnacle Polymers Polypropylene 4220H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for injection molding of flooring, automotive, appliance, lawn and garden products, and industrial applications. Provides an excellent base stock for compounding of filled and reinforced grades.

The 4220H product provides:

High impact and melt flow

Superior balance of stiffness and impact strength

Excellent color and processing stability

UL Listed

It is characterized by its easy mold flow and high impact at both room and sub-ambient conditions.

Pinnacle's 4220H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

General Information
Features	Food Contact Acceptable Good Color Stability Good Processing Stability High Flow Impact Copolymer Low Temperature Impact Resistance Ultra High Impact Resistance
Uses	Appliances Automotive Applications Compounding Flooring Industrial Applications Lawn and Garden Equipment
Agency Ratings	FDA 21 CFR 176.170 Table 1 & 2, Cond A-H FDA 21 CFR 177.1520(c) 3.1a FDA 21 CFR 177.1520(c) 3.2a UL Unspecified Rating
Forms	Pellets
Processing Method	Compounding Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	20	g/10 min	ASTM D1238
Molding Shrinkage - Flow	1.3	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	24.2	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	6.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1100	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	> 530	J/m	ASTM D256
Gardner Impact ⁵(-30°C)	24.8	J	ASTM D5420

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	105	°C	ASTM D648

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Method G, Geometry GC

Resin Grade	Manufacturer	Category	Trademark
Small Boss RPVC06	Tongxiang Small Boss Special Plastic Products Co., Ltd.	PVC, Rigid	Small Boss
Versaflex™ HC MT224	PolyOne Corporation	TPE	Versaflex™
Geon™ Vinyl Rigid Extrusion 78761	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
Karina MBU YELLOW(OP) -E 02/ 5-FC-HSF	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
PHOENIX™ 3901	Phon Tech Industrial Company	SEBS	PHOENIX™