Order Products : sales@su-jiao.com
MAJORIS FFR030X
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1k56Dh_MAJORIS-FFR030X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJORIS FFR030X is a low halogen flame retardant high performance polypropylene compound, UL 94 V0, intended for injection moulding. The product is available in natural (MAJORIS FFR030X) but other colours can be supplied on request. MAJORIS FFR030X is intended for components which require long term heat resistance, it has a good heat distortion temperature, good rigidity and good dimensional stability. APPLICATIONS MAJORIS FFR030X is intended for the injection moulding of electrical indoor component, directive conform 2002/95/CE (RoHS) and WEEE. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 23 | g/10 min | ISO 1133 |
| Molding Shrinkage (2.00 mm) | 1.9 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2370 | MPa | ISO 527-2/1 |
| Flexural Modulus 1 | 2200 | MPa | ISO 178 |
| Flexural Stress | 38.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 21 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 125 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 70.0 | °C | ISO 75-2/A |
| Ball Pressure Test (125°C) | Pass | IEC 60335-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | UL 94 | |
| 3.20 mm | V-0 | UL 94 | |
| Glow Wire Flammability Index (1.00 mm) | 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 200 - 240 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Holding pressure: 30 to 60% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SMOKEGUARD™ O 204 NATURAL | AlphaGary | Polyolefin, Unspecified | SMOKEGUARD™ O |
| Topolymer® 8218-P | Dongguan Top Polymer Enterprise | TPE | Topolymer® |
| DuraGrip® DGR 6170BK | Advanced Polymer Alloys | TPE | DuraGrip® |
| ISOTAL™ C9F | SABIC Innovative Plastics Europe | Acetal (POM) Copolymer | ISOTAL™ |
| SABIC® HDPE CLARENE 3H673 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
