Order Products : sales@su-jiao.com
Adell PET WL-38
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell PET |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1cmZUZ_Adell-PET-WL-38.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell PET WL-38 is a Polyethylene Terephthalate (PET) material filled with 40% glass\mineral. It is available in North America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.60 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 to 0.30 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.050 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 87 | ||
| R-Scale | 120 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 124 | MPa | ASTM D638 |
| Flexural Modulus | 8340 | MPa | ASTM D790 |
| Flexural Strength | 175 | MPa | ASTM D790 |
| Compressive Strength | 145 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 243 | °C | |
| 1.8 MPa, Unannealed | 215 | °C | |
| Melting Temperature | 232 to 249 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B25 | NUREL, S.A. | Nylon 6 | Promyde® |
| Quadrathane™ ALC-55D-B30 | Biomerics, LLC | TPU-PC | Quadrathane™ |
| Mowiol® 56-88 | Kuraray Co., Ltd. | PVOH | Mowiol® |
| Fortron® 1140E7 | Celanese Corporation | PPS | Fortron® |
| KMI PP KM-055JB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
