Order Products : sales@su-jiao.com
Zytel® FR70M30V0 NC010
| Category: | Nylon 66 , NYLON RESIN |
| Manufacturer: | DuPont Performance Polymers |
| Trademark: | Zytel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1brtuA_Zytel-FR70M30V0-NC010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% Mineral Reinforced, Flame Retardant, Polyamide 66 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Part Marking Code (ISO 11469) |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.62 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.0 | -- | % | |
| Flow | 1.0 | -- | % | |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr, 2.00 mm | 4.0 | -- | % | |
| Equilibrium, 23°C, 2.00 mm, 50% RH | 1.3 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 6500 | 3500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 73.0 | 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 | 6.0 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 2.0 | 2.0 | kJ/m² | |
| 23°C | 2.5 | 3.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 20 | 19 | kJ/m² | |
| 23°C | 20 | 30 | kJ/m² | |
| Notched Izod Impact Strength | ISO 180/1A | |||
| -30°C | 2.0 | 1.9 | kJ/m² | |
| 23°C | 2.0 | 2.5 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 238 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 145 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | 235 | -- | °C | ISO 306/B50 |
| Melting Temperature 1 | 263 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 6.4E-5 | -- | cm/cm/°C | |
| Transverse | 8.1E-5 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | ||||
| -- | 1.0E+15 | -- | ohms | ASTM D257 |
| -- | -- | > 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | ||||
| -- | 1.0E+16 | -- | ohms·cm | ASTM D257 |
| -- | > 1.0E+15 | 1.0E+11 | ohms·cm | IEC 60093 |
| Electric Strength | 40 | 33 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | |||
| 100 Hz | 4.10 | 9.10 | ||
| 1 MHz | 3.70 | 4.20 | ||
| Dissipation Factor | IEC 60250 | |||
| 100 Hz | 0.014 | 0.041 | ||
| 1 MHz | 0.014 | 0.050 | ||
| Comparative Tracking Index | 325 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification | IEC 60695-11-10, -20 | |||
| 1.50 mm | V-0 5VA | -- | ||
| 0.750 mm | V-2 | -- |
| Fill Analysis | Dry | Conditioned | Unit | |
|---|---|---|---|---|
| Melt Density | 1.40 | -- | g/cm³ | |
| Specific Heat Capacity of Melt | 1700 | -- | J/kg/°C | |
| Thermal Conductivity of Melt | 0.23 | -- | W/m/K |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 2700 S-50A | RTP Company | SEBS | RTP |
| Ultramid® A3WG5 BK00564 | BASF Corporation | Nylon 66 | Ultramid® |
| Evoprene™ HP 3712 | AlphaGary | SBC | Evoprene™ HP |
| INSPIRE™ TF1501 ESU | Trinseo | PP, Unspecified | INSPIRE™ |
| LNP™ STAT-KON™ UEF26AS compound | SABIC Innovative Plastics Europe | PPA | LNP™ STAT-KON™ |
