Order Products : sales@su-jiao.com
Multi-Flex® TPE A7005 C
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Flex® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1bAqzF_Multi-Flex-TPE-A7005-C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multi-Flex® TPE A7005 C is a Thermoplastic Elastomer (TPE) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: good uv resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 72 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 7.58 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 720 | % | ASTM D412 |
| Tear Strength | 45.5 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 5 Temp. | 202 | °C | |
| Melt Temperature | 32.2 | °C | |
| Die Temperature | 207 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROPRENE® 1 A25 M1N | Taro Plast S.p.A. | TPV | TAROPRENE® |
| Hyundai EP XLPE XW100/Natural | HYUNDAI EP Co., Ltd. | XLPE | Hyundai EP XLPE |
| OmniPro™ HPP TF40 | OMNI Plastics, LLC | PP Homopolymer | OmniPro™ |
| PLUSTEK PB300G6 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| COPEC® CC6FDN (Series: VS/CR/AD1) | KRAIBURG TPE | TPE | COPEC® |
