Order Products : sales@su-jiao.com
PRIMALENE WPP531
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Southern Polymer, Inc. |
| Trademark: | PRIMALENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1awEul_PRIMALENE-WPP531.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
An injection molding grade low density polyethylene Applications:
Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 47 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 8.96 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 600 | % | ASTM D638 |
| Flexural Modulus - Tangent | 207 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -87.2 | °C | ASTM D746 |
| Vicat Softening Temperature | 87.2 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIEL® 5302FR | Samyang Corporation | TPEE | TRIEL® |
| Adell Polyamide BJ-13 Glass Reinforced High Impact | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Celanex® 2300 GV3/20 | Celanese Corporation | PBT | Celanex® |
| LNP™ STAT-KON™ DX03571 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
| ULTEM™ 1000 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
