Order Products : sales@su-jiao.com

KMI PP KM-154IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1aPet0_KMIPPKM154IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-154IB is a block copolymer polypropylene resin for injection molding applications. Food Contact Application: KM-154IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: HIP impact copolymer grade offers superior rigidity as well as excellent impact resistance due to the ideal combination of high crystalline homo matrix and optimum rubber morphology control. In addition, melt flowability of HIPP resin is significantly better than conventional PP resins.

Message

KM-154IB is a block copolymer polypropylene resin for injection molding applications.

Food Contact Application:
KM-154IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact.

Characteristics:

HIP impact copolymer grade offers superior rigidity as well as excellent impact resistance due to the ideal combination of high crystalline homo matrix and optimum rubber morphology control. In addition, melt flowability of HIPP resin is significantly better than conventional PP resins.

General Information
Features	Block Copolymer Rigidity, high High crystallization Impact copolymer Impact resistance, high Compliance of Food Exposure
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	8.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	99		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	34.3	MPa	ASTM D638
Tensile Elongation (Break)	200	%	ASTM D638
Flexural Modulus	1770	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	110	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	135	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Santoprene™ 241-73W236	ExxonMobil Chemical	TPV	Santoprene™
TECHLEN M7153R	DAEHA Co., LTD	PP, Unspecified	TECHLEN
Unipren® Elastomers B3 NTLA010 90A UP320	Petropol Industry and Trade of Polymers LTDA	PP+EPDM	Unipren® Elastomers
AIE PA6 50G6ST	Asia International Enterprise (Hong Kong) Limited	Nylon 6	AIE PA6
Karina CLEAR PVC COMPOUND 65/200-SD	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina