Order Products : sales@su-jiao.com
Edgetek™ CY1000-20GF/000 BK005
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Edgetek™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1ZFPSu_Edgetek-CY1000-20GF-000-BK005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Edgetek™CY1000-20GF/000 BK005 is a polycarbonate + acrylonitrile butadiene styrene (PC + ABS) product, and the filler is 20% glass fiber reinforced material. It can be processed by injection molding and is available in the Asia-Pacific region. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 95.0 | MPa | ASTM D638 |
| Flexural Modulus 2 | 7500 | MPa | ASTM D790 |
| Flexural Strength 3 | 155 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 120 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 100 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 230 - 250 | °C | |
| Middle Temperature | 230 - 250 | °C | |
| Front Temperature | 230 - 250 | °C | |
| Mold Temperature | 70.0 - 90.0 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 1.3 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P1957TA | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| PREMIER™ A220-HT | Chomerics, div. of Parker Hannifin Corp. | PC+ABS | PREMIER™ |
| Sinpolene MBB0091 | Teknor Apex Asia Pacific PTE. LTD. | LLDPE | Sinpolene |
| Cabofor® 24 GF/10 V0 BIANCO 0257 | SO.F.TER. SPA | PC | Cabofor® |
| Cri-Line SP-510-55 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
