Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion 87150
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1Xzrck_Geon-Vinyl-Rigid-Extrusion-87150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Extrusion 87150 is a rigid polyvinyl chloride product,. It can be processed by extrusion and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: water pipes/pipes/drinking water. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 16344 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2710 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 41.9 | MPa | ASTM D638 |
| Flexural Modulus | 2520 | MPa | ASTM D790 |
| Flexural Strength | 72.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 23°C, 3.18mm, injection molding | 1100 | J/m | ASTM D256A |
| Transverse flow : 23°C, 3.18mm, molded | 870 | J/m | ASTM D256A |
| Flow : 23°C, 3.18mm, molded | 700 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 52.5 | J/cm | ASTM D4226 |
| 23°C 4 | 108 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 74.4 | °C | ASTM D648 |
| CLTE - Flow | 6.5E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.749mm, all | V-0 | UL 94 | |
| 1.90mm, all | 5VA | UL 94 | |
| CSA Flammability 5 | |||
| 701.0 µm | V-0 | ||
| 730.0 µm | 5VA |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Ease of Sizing | Good | ||
| 注释：按特定颜色获取NSF清单。请联系普立万公司获取该产品已认证颜色的最新清单。注释：分档是采用注塑模制样品进行缺口摆锤冲击试验确定的。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 - 193 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| 5 . | All colors |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NILAMID® B2 HH GF60 | Nilit Plastics | Nylon 6 | NILAMID® |
| 3M™ Dyneon™ PTFE Compound TFX 4262 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
| ALTECH® ABS A 1000/627 UV | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
| Geon™ 170 Series 178 | Mexichem Specialty Resins, Inc. | PVC Homopolymer | Geon™ 170 Series |
| Lucent PP CPP-0307 | Lucent Polymers, Inc. | PP, Unspecified | Lucent PP |
