Order Products : sales@su-jiao.com
Braskem PE GE7252
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1Wgi1a_Braskem-PE-GE7252.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GE7252 is a bimodal High Density Polyethylene specially developed for the manufacturing of caps and closures that require high stress cracking resistance. Application: Caps and closures for low or non CO 2 content Process: Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.952 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(2.00 mm, 10% Igepal, Compression Molded, F50) | 40.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 26.0 | MPa | |
| Break, Compression Molded | 14.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield, Compression Molded | 9.0 | % | |
| Break, Compression Molded | 400 | % | |
| Flexural Modulus (Compression Molded) | 1200 | MPa | ASTM D790 |
| Note Message | |
|---|---|
| 1 . | 0.3mm notched-plaques |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VENYL SE037 - 1731 | AD majoris | Nylon 6 | VENYL |
| Udel® P-3700 HC | Solvay Specialty Polymers | PSU | Udel® |
| NEXUS PE HDPE-1062 | Nexus Resin Group, LLC. | HDPE | NEXUS PE |
| Paxon™ BA50-100 | ExxonMobil Chemical | HDPE, UHMW | Paxon™ |
| LUVOCOM® 80/CF/12/TF/10/BK 100 | LEHVOSS Group | Acetal (POM) Copolymer | LUVOCOM® |
