Order Products : sales@su-jiao.com

Braskem PE HF2007

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Braskem
Trademark:	Braskem PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1W5nNW_Braskem-PE-HF2007.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HF2007 is a Linear Low Density Polyethylene, 1-hexene copolymer, produced by gas phase process. Developed for blown film extrusion. Films obtained with this product show high impact and puncture resistance. It contains processing aid and antioxidant additives. Applications: Stretch film; high COF film and LDPE blends. Process: HF2007 must be processed in blown extruder, adjusted to this polymer. The excellent conditions of processing in accordance with the type of used equipment, but the best results are gotten with 180 to 210°C extrusion temperature.

Message

HF2007 is a Linear Low Density Polyethylene, 1-hexene copolymer, produced by gas phase process. Developed for blown film extrusion. Films obtained with this product show high impact and puncture resistance. It contains processing aid and antioxidant additives.

Applications:
Stretch film; high COF film and LDPE blends.

Process:
HF2007 must be processed in blown extruder, adjusted to this polymer. The excellent conditions of processing in accordance with the type of used equipment, but the best results are gotten with 180 to 210°C extrusion temperature.

General Information
Additive	Antioxidant Processing Aid
Features	Antioxidant Copolymer High Impact Resistance Low Density Puncture Resistant
Uses	Film
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.920	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.73	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D882
MD : Break, 25 µm	47.0	MPa
TD : Break, 25 µm	35.0	MPa
Tensile Elongation			ASTM D882
MD : Break, 25 µm	990	%
TD : Break, 25 µm	1300	%

Optical	Nominal Value	Unit	Test Method
Gloss (45°, 130 µm)	65		ASTM D2457
Haze	24	%	ASTM D1003

Resin Grade	Manufacturer	Category	Trademark
Selvol™ ULTALUX FP	Sekisui Chemical Company, Ltd.	PVOH	Selvol™
apilon 52bio® TB 70A	API SpA	TPU-Polyether	apilon 52bio®
Elastollan® C 74 D	BASF Polyurethanes GmbH	TPU-Polyester	Elastollan®
HiFill® PA6/6 GF55 HS L	Techmer Engineered Solutions	Nylon 66	HiFill®
TORZEN® G2500HS1L NC01	INVISTA Engineering Polymers	Nylon 66	TORZEN®