Order Products : sales@su-jiao.com
Indothene LL LL 24FA030
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Indothene LL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1UQ7ap_Indothene-LL-LL-24FA030.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Indothene-LL LL24FA030 is a linear low-density polyethylene produced by gas-phase fluidised bed process using butene as comonomer. It is specially designed for low voltage insulation compound for silane cross-linking process by way optimal co monomer insertion. The grade is designed with optimum level of antioxidants and does not contain slip or anitblock. FOOD CONTACT APPLICATIONS : This grade shall meet the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It shall also conform to the positive list of constituents as approved in IS: 10141:1982. The grade may also comply with FDA regulation: CFR title 21, 177.1520, Olefin polymer . |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 3.20 mm) | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 3.20 mm) | 650 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 108 | °C | ASTM D1525 |
| Melting Temperature | 121 to 124 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 to 230 | °C | |
| Cylinder Zone 2 Temp. | 160 to 230 | °C | |
| Cylinder Zone 3 Temp. | 160 to 230 | °C | |
| Cylinder Zone 4 Temp. | 160 to 230 | °C | |
| Cylinder Zone 5 Temp. | 160 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TC3MSZ (Series: AD1) | KRAIBURG TPE | TPE | THERMOLAST® K |
| XANTAR® RX 1045 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| Ferro PP TPP20AC06HB | Ferro Corporation | PP Homopolymer | Ferro PP |
| OP - PBT OPX8320 | Oxford Polymers | PBT | OP - PBT |
| POLYfill PP HJ752 UV | Polykemi AB | PP, Unspecified | POLYfill |
