Ajedium™ Films -- KetaSpire® KT-820 Datasheet,PEEK,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
KetaSpire® KT-820 PEEK film is thermoplastic film that is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, high purity, and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in aerospace, electronics, chemical processing, healthcare, transportation, and other industrial uses.

General Information
Features	Good dimensional stability Good disinfection Anti-gamma radiation Impact resistance, good Good chemical resistance Fatigue resistance Heat resistance, high ductility Flame retardancy
Uses	Electrical/Electronic Applications Aircraft applications Industrial application Application in Automobile Field Oil/Gas Supplies Medical/nursing supplies
RoHS Compliance	RoHS compliance
Appearance	Translucent

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.30	g/cm³	ASTM D792
Water Absorption (24 hr)	0.50	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tear Resistance	10.0	cN	ASTM D1004

Films	Nominal Value	Unit	Test Method
Tear Propagation Resistance	320	gf	ASTM D1922
Area coefficient	149	ft²/lb/mil
Film Thickness - Tested
--	25	µm
-- ¹	50	µm
-- ²	130	µm
secant modulus			ASTM D882
MD	2050	MPa	ASTM D882
TD	2000	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	75.8	MPa	ASTM D882
TD : Yield	72.4	MPa	ASTM D882
MD : Fracture	109	MPa	ASTM D882
TD : Fracture	95.8	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Yield	6.8	%	ASTM D882
TD : Yield	6.7	%	ASTM D882
MD : Fracture	150	%	ASTM D882
TD : Fracture	170	%	ASTM D882
Dart Drop Impact	1300	g	ASTM D1709B

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ³(1.8 MPa, Annealed, 3.20 mm)	157	°C	ASTM D648
Glass Transition Temperature	150	°C	ASTM D3418
Peak Melting Temperature	340	°C	ASTM D3418
CLTE - Flow (-50 to 50°C)	4.3E-5	cm/cm/°C	ASTM E831
Thermal Conductivity	0.24	W/m/K	ASTM E1530

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.9E+17	ohms	ASTM D257
Volume Resistivity	2.6E+16	ohms·cm	ASTM D257
Dielectric Strength (0.0500 mm)	150	kV/mm	ASTM D149
Dielectric Constant (1 kHz)	3.10		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	37	%	ASTM D2863

Additional Information
Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For KetaSpire® film, the standard thicknesses are 8 microns (0.3 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Additional Information

Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For KetaSpire® film, the standard thicknesses are 8 microns (0.3 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Note Message
1 .	Impact properties
2 .	Tear properties
3 .	200°C,2 hours

Category:	PEEK , Polyetheretherketone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Ajedium™ Films
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1SGKit_Ajedium-Films----KetaSpire-KT-820.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 2099 X 124789 D	RTP Company	PLA	RTP
Pro-fax SL840	INDELPRO, S.A. de C.V.	PP Copolymer	Pro-fax
SCANAMID 66 A11^ X30 LS	Polykemi AB	Nylon 66	SCANAMID 66
Clariant Nylon 6 60G25-L	Clariant Corporation	Nylon 6	Clariant Nylon 6
Chemlon® 60GF3	Teknor Apex Company (Chem Polymer)	Nylon 6	Chemlon®