Order Products : sales@su-jiao.com
TECANAT TECANAT
| Category: | PC , Polycarbonate |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECANAT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1PwR7Y_TECANAT-TECANAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECANAT is a natural unfilled polycarbonate that has transparency, excellent impact strength and tensile properties, TECANAT GF20 is a 20% glass-reinforced polycarbonate with higher temperature and tensile properties than the unfilled TECANAT. Polycarbonate is an amorphous thermoplastic. Good electrical properties combined with superior impact strength and moderate chemical resistance make this product widely accepted for numerous applications, This product is offered in many popular rod and plate sizes. Typical applications include business equipment where gears, rollers, internal mechanical parts, connectors and relays are required. The automotive industry uses polycarbonate materials for pumps, valves, light bezels and instrument panels. It also is applicable to many other industries. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Water Absorption 1 | ASTM D570 | ||
| 23°C, 24 hr | 0.15 | % | ASTM D570 |
| Saturated, 23°C | 0.35 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M grade, 23°C, injection molding | 70 | ASTM D785 | |
| Grade R, 23°C, Injection Molding | 118 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2340 | MPa | ASTM D638 |
| Tensile Strength (Yield, 23°C) | 62.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 90 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2210 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 99.3 | MPa | ASTM D790 |
| Coefficient of Friction 2(vs. Itself - Dynamic) | 0.38 | ||
| Wear Factor 3(0.28 MPa, 0.25 m/sec) | 5000 | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 138 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 132 | °C | ASTM D648 |
| Vicat Softening Temperature 4 | 154 | °C | ASTM D1525 |
| CLTE - Flow 5 | 6.8E-5 | cm/cm/°C | ASTM D696 |
| Specific Heat 6 | 1260 | J/kg/°C | ASTM C351 |
| Thermal Conductivity 7 | 0.19 | W/m/K | ASTM C177 |
| Maximum Service Temperature | |||
| Intermittent | 135 | °C | |
| Long Term | 121 | °C | UL 746B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 8 | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength 9 | 15 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1 MHz 10 | 2.96 | ASTM D150 | |
| 23°C, 60 Hz 11 | 3.17 | ASTM D150 | |
| Dissipation Factor 12(23°C, 60 Hz) | 9.0E-4 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating 13(1.47 mm) | HB | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material unless otherwise noted. |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | 40 psi, 50 fpm; Injection Molded |
| 3 . | Against Steel, Injection Molded |
| 4 . | Injection Molded |
| 5 . | Injection Molded |
| 6 . | Injection Molded |
| 7 . | Injection Molded |
| 8 . | Injection Molded |
| 9 . | Injection Molded |
| 10 . | Injection Molded |
| 11 . | 50% RH, Injection Molded |
| 12 . | Injection Molded |
| 13 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2501N0 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| SureSpec LLC4-200G | Genesis Polymers | LLDPE | SureSpec |
| Delta PER-3G40 | Delta Polymers | PE, Unspecified | Delta |
| ELITE™ AT 6111 | The Dow Chemical Company | EPE | ELITE™ |
| Sylvin 83030-87 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
