Order Products : sales@su-jiao.com
NOVAPOL® LF-Y824-C
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | NOVA Chemicals |
| Trademark: | NOVAPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1Mg9Ab_NOVAPOLLFY824C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NOVAPOL®LF-Y824-C is a low density polyethylene material,. This product is available in North America and is processed by blowing film. NOVAPOL®The main features of the LF-Y824-C are:
Typical application areas include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.924 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.75 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 38 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 38 µm, blown film | 190 | MPa | ASTM D882 |
| 1% secant, TD : 38 µm, blown film | 210 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 38 µm, blown film | 14.0 | MPa | ASTM D882 |
| TD : Yield, 38 µm, blown film | 11.0 | MPa | ASTM D882 |
| MD : Broken, 38 µm, blown film | 23.0 | MPa | ASTM D882 |
| TD : Broken, 38 µm, blown film | 18.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Broken, 38 µm, blown film | 290 | % | ASTM D882 |
| TD : Broken, 38 µm, blown film | 520 | % | ASTM D882 |
| Dart Drop Impact (38 µm) | 130 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm, blown film | 200 | g | ASTM D1922 |
| TD : 38 µm, blown film | 250 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 38.0 µm, Blown Film) | 70 | ASTM D2457 | |
| Haze (38.0 µm, Blown Film) | 6.0 | % | ASTM D1003 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Friction Puncture | 130 | J/cm | Internal method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 705 CC | RTP Company | HDPE | RTP |
| AMTOPP CW18 | Inteplast Group | PP, Unspecified | AMTOPP |
| Evoprene™ LF 6158 | AlphaGary | SBC | Evoprene™ LF |
| Grilamid® XE 3959 nat | EMS-GRIVORY | Nylon 610 | Grilamid® |
| Hanwha Total PP RS401 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
