Order Products : sales@su-jiao.com
Arnite® A06 300
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Arnite® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1LRG79_Arnite-A06-300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Arnite® A06 300 is a Polyethylene Terephthalate (PET) material. It is available in Europe for extrusion. Primary attribute of Arnite® A06 300: High Viscosity. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.40 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 0.75 | % | |
| Equilibrium, 23°C, 50% RH | 0.30 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature 1 | 255 | °C | ISO 11357-3 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Thermal Conductivity | 0.24 | W/m/K | |
| Specific Heat Capacity of Melt | 2050 | J/kg/°C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| RSV 2 | 2.04 | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 to 120 | °C | |
| Drying Time | 3.0 to 12 | hr | |
| Rear Temperature | 270 to 280 | °C | |
| Middle Temperature | 270 to 290 | °C | |
| Front Temperature | 270 to 290 | °C | |
| Nozzle Temperature | 270 to 290 | °C | |
| Processing (Melt) Temp | 270 to 290 | °C | |
| Mold Temperature | 130 to 140 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 3.00 to 10.0 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| 2 . | m-cresol, 1g/100ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VINIKA® D7653 | Mitsubishi Chemical Performance Polymers, Inc. | PVC, Rigid | VINIKA® |
| BorPEX™ HE2595 | Borealis AG | HDPE, HMW | BorPEX™ |
| CelloTherm™ P325 | Innovia Films Ltd. | CA | CelloTherm™ |
| HiFill FR® PA6 GF25 FR HS L | Techmer Engineered Solutions | Nylon 6 | HiFill FR® |
| Sylvin 4225-75 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
