Order Products : sales@su-jiao.com

Addisil™ 6100

Category:	Silicone , Silicone
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Addisil™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1KTs8T_Addisil-6100.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Addisil 6100 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Addisil 6100 is a black, thixotropic paste, which can be applied to vertical or overhead surfaces. Key Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140 °C to 230 °C) Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminium, ceramic) No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range Service temperature -50 °C to 250 °C

Message

Addisil 6100 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.

Addisil 6100 is a black, thixotropic paste, which can be applied to vertical or overhead surfaces.

Key Features and Benefits

One component product - no mixing required

Room temperature storage

Fast cure at elevated temperature (in a range of 140 °C to 230 °C)

Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminium, ceramic)

No formation of cure by-products

Non-corrosive to metals

Good performance over a wide temperature range

Service temperature -50 °C to 250 °C

General Information
Features	Bondability Fast Cure Good Adhesion Heat Cure Non-Corrosive Thixotropic
Uses	Adhesives Sealants
Appearance	Black
Forms	Paste

Thermoset	Nominal Value	Unit
Shelf Life (< 27°C)	> 17	wk

Uncured Properties	Nominal Value	Unit
Density	1.12	g/cm³
Curing Time
200°C	8.3E-3	hr
175°C	< 0.033	hr
150°C	< 0.083	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	42
Tensile Strength	9.50	MPa
Tensile Elongation at Break	> 300	%
Tear Strength	25.0	kN/m

Resin Grade	Manufacturer	Category	Trademark
Witcom POM-C 2005/130	Witcom Engineering Plastics B.V.	Acetal (POM) Copolymer	Witcom POM-C
NILENE® P K30VA V0	Taro Plast S.p.A.	PP Homopolymer	NILENE®
DOMAMID® 66B40	DOMO Engineering Plastics SPA	Nylon 66	DOMAMID®
Hypro® PPH-T20	Entec Polymers	PP Homopolymer	Hypro®
Vipel® F737-BCC-00	AOC, L.L.C.	Polyester Alloy	Vipel®