Order Products : sales@su-jiao.com
PermaStat® 1000 FR
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | RTP Company |
| Trademark: | PermaStat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1KM7gt_PermaStat-1000-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.46 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 1.5 - 2.0 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2070 | MPa | ASTM D638 |
| Tensile Strength | 41.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 5.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 2070 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 65.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 960 | J/m | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 5.5E+10 | ohms | ASTM D257 |
| Volume Resistivity | 5.5E+9 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods.Static Decay MIL-PRF-81705D, FTMS-4046.1: 2 sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 204 - 232 | °C | |
| Middle Temperature | 204 - 232 | °C | |
| Front Temperature | 204 - 232 | °C | |
| Mold Temperature | 38.0 - 121 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Abstron KU603 | Bhansali Engineering Polymers Limited | ABS | Abstron |
| ACCUTECH™ CP0436G5M25CL | ACLO Compounders Inc. | PP Copolymer | ACCUTECH™ |
| Anjacom® 10/25S-UV | Almaak International GmbH | PC+ABS | Anjacom® |
| Mafill® CR C 5044 H | Ravago Group | PP Copolymer | Mafill® |
| KMI PP KM-0275ZW | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
