Order Products : sales@su-jiao.com
ICORENE® 2551
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1H7D5A_ICORENE-2551.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 2551 is a linear low density polyethylene powder specically developed for rotational moulding. This grade has been designed for applications requiring good processability, toughness and flexibility. ICORENE® 2551 is suitable or use in many different applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 11.0 | MPa | ASTM D638 |
| Flexural Modulus | 330 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance (-20°C) | 180 | J/cm | ISO 6603-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROPRENE® 1 A75 E1N | Taro Plast S.p.A. | TPV | TAROPRENE® |
| Utomer UT1CP80A | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyester | Utomer |
| AMTOPP TT35 | Inteplast Group | PP, Unspecified | AMTOPP |
| Geon™ Vinyl Rigid Extrusion 84110 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| K-vinyl KK-I-A-90 | Technovinyl Polymers India Ltd. | PVC, Unspecified | K-vinyl |
