Telcar® TL-3050-88 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Telcar TL-3050-88 is a general purpose thermoplastic elastomer designed for electrical applications requiring flexibility over a wide termperture range. Telcar TL-3050-88 is a high durometer grade that is RoHS compliant. This grade is UL listed and is suitable for both injection molding and extrusion.

General Information
Features	High elasticity High tensile strength Good melt strength Good flexibility Good coloring Low liquidity General Halogen-free Extended tensile rate High hardness
Uses	Electrical components Wire and cable applications Washer Insulating material Connector Moisture-resistant insulating material Weather-resistant sealing strip Fatigue elimination supplies General
Agency Ratings	UL 1581 2
RoHS Compliance	RoHS compliance
UL File Number	QMTT2.E73402
Appearance	Translucent
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	91	ASTM D2240
Shaw A, 15 seconds	88	ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	280	MPa	ASTM D790

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
100% strain, 0.508mm ²	6.21	MPa	ASTM D412
300% strain, 0.508mm ³	7.79	MPa	ASTM D412
Tensile Strength (fracture, 0.508mm)	20.5	MPa	ASTM D412
Tensile Elongation (fracture, 0.508mm)	700	%	ASTM D412

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (136°C, 168 hr)	28	%	ASTM D573
Change in Ultimate Elongation in Air (136°C, 168 hr)	-7.0	%	ASTM D573
Change in Tensile Strength (60°C, 168 hr, in IRM 902 Oil)	-84	%	ASTM D471
Change in Ultimate Elongation (60°C, 168 hr, in IRM 902 Oil)	-75	%	ASTM D471

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-60.0	°C	ASTM D746
RTI Elec	50.0	°C	UL 746
RTI	50.0	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity			ASTM D257
23°C	6.4E+18	ohms·cm	ASTM D257
50°C	6.8E+15	ohms·cm	ASTM D257
Dielectric Strength	45	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
1 kHz	2.10		ASTM D150
1 MHz	2.10		ASTM D150
Dissipation Factor			ASTM D150
1 kHz	8.0E-4		ASTM D150
1 MHz	2.8E-3		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.50 mm, ALL)	HB		UL 94
Oxygen Index	17	%	ASTM D2863

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	171 - 193	°C
Middle Temperature	177 - 199	°C
Front Temperature	182 - 204	°C
Nozzle Temperature	188 - 210	°C
Processing (Melt) Temp	188 - 210	°C
Mold Temperature	25.0 - 65.6	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	166 - 188	°C
Cylinder Zone 2 Temp.	171 - 193	°C
Cylinder Zone 3 Temp.	177 - 199	°C
Cylinder Zone 5 Temp.	182 - 204	°C
Die Temperature	190 - 210	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Note Message
1 .	die cut from extruded tapes
2 .	Mouth die C, 510mm/min
3 .	C mold, 510mm/min

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Telcar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1Ggmi9_Telcar-TL-3050-88.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 2300 A AR 15 TFE 15	RTP Company	TPU-Polyester	RTP
NuSil MED-4050	NuSil Technology	Rubber	NuSil
DJSilicone NE-631	DONGJUE SILICONE (NANJING) CO., LTD	Silicone	DJSilicone
ENGAGE™ 8842	The Dow Chemical Company	TPO (POE)	ENGAGE™
neogol® 80 C UG	API SpA	TPO (POE)	neogol®