Order Products : sales@su-jiao.com

Westlake Dielux®

Category:	Acetal (POM) Copolymer , Acetal (POM) Copolymer
Manufacturer:	Westlake Plastics Company
Trademark:	Westlake
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1Ge2Fs_Westlake-Dielux-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Dielux PTFE filled acetal copolymer is an outstanding bearing and wear material for use in both wet and dry environments. Dielux is frequently used in place of traditional metal bearing materials when low friction, excellent wear properties, and good dimensional stability are required. The PTFE filler allows Dielux to be used without additional lubricants in applications where grease and oil are undesirable. The white grade of Dielux is FDA compliant for use in food processing machinery.

Applications Include:

Bearings

Bushings

Wear pads

Gears

Advantages of Dielux:

Excellent wear properties in both wet and dry environments

Low friction

Low moisture absorption

Good chemical resistance

Good dimensional stability

High strength and stiffness

Easy to machine

FDA compliant (white only)

General Information
Additive	PTFE Lubricant
Features	Copolymer Food Contact Acceptable Good Chemical Resistance Good Dimensional Stability Good Wear Resistance High Stiffness High Strength Low Friction Low Moisture Absorption Lubricated Machinable
Uses	Bearings Bushings Gears
Agency Ratings	FDA Food Contact, Unspecified Rating 2
Appearance	Brown White
Forms	Rod Sheet

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.50	g/cm³	ASTM D792
Water Absorption (24 hr)	0.10	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	46.9	MPa	ASTM D638
Tensile Elongation (Break)	22	%	ASTM D638
Flexural Modulus	2060	MPa	ASTM D790
Flexural Strength (Yield)	65.5	MPa	ASTM D790
Coefficient of Friction			ASTM D3702 Modified
Dynamic ¹	0.24
Static ²	0.13
Wear Factor	20	10^-8 mm³/N·m	ASTM D3702

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	43	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	84.4	°C	ASTM D648

Electrical	Nominal Value	Unit
Dielectric Strength ³	0.45	kV/mm

Note Message
1 .	40 psi, 50 fpm
2 .	40 psi
3 .	FED.T.M.ST.406BM4031

Resin Grade	Manufacturer	Category	Trademark
Shinko-Lac® ABS TM25	Mitsubishi Rayon America Inc.	ABS	Shinko-Lac®
Softflex® 8795	Network Polymers, Inc.	TPE	Softflex®
THERMOLAST® K TF8THT (Series: FC/ht)	KRAIBURG TPE	TPE	THERMOLAST® K
Gallonprene® GP200-18	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
LubriOne™ PC-30GF/15T BLACK	PolyOne Corporation	PC	LubriOne™