Order Products : sales@su-jiao.com
Braskem PP H521
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Braskem America Inc. |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1G0rcc_Braskem-PP-H521.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sub-group Homopolymer Description Injection Molding, General Purpose, Low Water Carryover Applications Suggested Uses Include Tape, Slit-film Fibers, Containers, Closures, Housewares |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 103 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 37.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1650 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 37 | J/m | ASTM D256A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Elongation of Fibers 4 | 36 | % | ASTM D2256 |
| Tenacity of Fibers 5 | 4.50 | g/denier | ASTM D2256 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | 3.3 draw ratio, 1,250 m/min roll speed, 225°C spin temperature, D1000/68 |
| 5 . | 3.3 draw ratio, 1,250 m/min roll speed, 225°C spin temperature, D1000/68 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® N8950 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| SLOVALEN® PQ 81 T 15 | Plastcom | PP+EPDM | SLOVALEN® |
| Vi-Chem PVC V141-60 | Vi-Chem Corporation | PVC, Unspecified | Vi-Chem PVC |
| Plantic® WR700 | Plantic Technologies Limited | Biodeg Polymers | Plantic® |
| Plenco 04485 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
