Order Products : sales@su-jiao.com

ISPLEN® PR 240 G1F

Category:	PP Random Copolymer , Polypropylene Random Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	1Fe80k_ISPLEN-PR-240-G1F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PR 240 G1F is a medium melt flow rate propylene-ethylene random copolymer, with a basic formulation, adapted for extrusion. It does not include any antistatic agent or nucleating additives in its formulation. It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than that of the base polymer. TYPICAL APPLICATIONS Sheets and thermoforming. Corrugated cardboard. Non-oriented film, Cast-film Flexible Pipes Recommended melt temperature range from 190 - 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PR 240 G1F is a medium melt flow rate propylene-ethylene random copolymer, with a basic formulation, adapted for extrusion. It does not include any antistatic agent or nucleating additives in its formulation.
It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than that of the base polymer.

TYPICAL APPLICATIONS

Sheets and thermoforming. Corrugated cardboard.

Non-oriented film, Cast-film

Flexible Pipes

Recommended melt temperature range from 190 - 250°C. Processing conditions should be optimised for each production line.

General Information
Features	Food Contact Acceptable Good Colorability Medium Flow
Uses	Cast Film Film Non-oriented Film Piping Sheet
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Cast Film Extrusion Pipe Extrusion Sheet Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	3.0	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	850	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	9.0	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	75.0	°C	ISO 75-2/B
Vicat Softening Temperature	135	°C	ISO 306/A

Extrusion	Nominal Value	Unit
Melt Temperature	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
Moplen HP493M	LyondellBasell Industries	PP Homopolymer	Moplen
ALCOM® PA66 910/1.1 AR10 CF10	ALBIS PLASTIC GmbH	Nylon 66	ALCOM® PA66
ALTECH® PBT + ASA A 4212/506 GF3MR9	ALBIS PLASTIC GmbH	PBT+ASA	ALTECH® PBT + ASA
Durethan® BKV 30 H3.0 000000	LANXESS GmbH	Nylon 6	Durethan®
Latiohm 57-05 PD01 G/15	LATI S.p.A.	PPA	Latiohm