Order Products : sales@su-jiao.com
DOW™ HDPE DGDA-2485 NT
| Category: | HDPE , High Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1FGP51_DOW-HDPE-DGDA-2485-NT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Comply with industry standards
DOW DGDA-2485 NT high density polyethylene resin is prepared by UNIPOL™II process technology is widely used, including extrusion processing of profiles such as corrugated pipes. It combines excellent ESCR/NCLS performance with excellent toughness and processability. remarks: (1) the first 5 digits in the standard grade represent the primary color resin used in the product. The last digit and the following letters represent black resin (6.5% DFNF-0092 is added to the primary color resin). (2) Under appropriate processing conditions, carbon black masterbatch DFNF-0092 (6.5%) can be added to extrude the primary color resin. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.947 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.060 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 9.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 21.4 | MPa | ASTM D638 |
| Fracture | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 690 | % | ASTM D638 |
| Flexural Modulus 1 | 1280 | MPa | ASTM D790B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Melting Temperature (DSC) | 131 | °C | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| NCLS | > 5000 | hr | ASTM F2136 |
| 根据 ASTM D 1928 程序 C 准备压缩模塑配件。属性将随着模塑条件和老化时间的变化而变化。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 193 - 227 | °C |
| Extrusion instructions |
|---|
| 制造条件： 螺杆类型：高质量 HDPE（对于完全熔解最好使用阻隔） 熔体温度范围：380-440 °F (193-225 °C) |
| Note Message | |
|---|---|
| 1 . | Method I (three-point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Arak LLDPE HD5218EA | Shazand (Arak) Petrochemical Corporation | HDPE | Arak LLDPE |
| Greenflex® FC 45 F | Versalis S.p.A. | EVA | Greenflex® |
| Hifax TYC337P 4 | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| Eleme HPIG110 | Eleme Petrochemical Company Ltd | PP Homopolymer | Eleme |
| Axiall PVC HL-5009 | Axiall Corporation | PVC, Rigid | Axiall PVC |
