Order Products : sales@su-jiao.com
Mytex® AS65K-2ATM
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1CuNiM_Mytex-AS65K-2ATM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Talc filled compounded polypropylene produced for automotive interior applications using Mytex® Technology. This maierial exhibits high flow and good processability characteristics. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Ash Content | 25 | % | ASTM D5630 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 20.0 | MPa | ISO 527-2/50 |
| Flexural Modulus - Tangent 1 | 2170 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 35 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 110 | °C | ISO 75-2/B |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nipol® NBR DN3380 | Zeon Corporation | NBR | Nipol® NBR |
| Fainplast PVC KL 0993 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| EL-Lene™ H455JA | SCG Chemicals Co., Ltd. | HDPE | EL-Lene™ |
| FluorLoop® CH10/1001 | Solvay Specialty Polymers | PVDF | FluorLoop® |
| EPAMOULD 685A26 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
