Order Products : sales@su-jiao.com
TAISOX 3225
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation |
| Trademark: | TAISOX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1Ct3B9_TAISOX-3225.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TAISOX 3225 is a linear low density polyethylene material,. This product is available in North America, Europe or Asia Pacific region. The processing method is: cast film. The main characteristics of TAISOX 3225 are puncture resistance. Typical application areas include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 20 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 20 µm, cast film | 147 | MPa | ASTM D882 |
| 1% secant, TD : 20 µm, cast film | 206 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 20 µm, extruded film | 9.81 | MPa | ASTM D882 |
| TD : Yield, 20 µm, extruded film | 10.8 | MPa | ASTM D882 |
| MD : Fracture, 20 µm, extruded film | 35.3 | MPa | ASTM D882 |
| TD : Fracture, 20 µm, extruded film | 27.5 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture, 20 µm, extruded film | 600 | % | ASTM D882 |
| TD : Fracture, 20 µm, extruded film | 800 | % | ASTM D882 |
| Dart Drop Impact (20 µm, Cast Film) | 120 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 20 µm, cast film | 88 | g | ASTM D1922 |
| TD : 20 µm, cast film | 240 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 93.0 | °C | ASTM D1525 |
| Melting Temperature | 122 | °C |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 20.0 µm, Cast Film) | 96 | ASTM D2457 | |
| Clarity | 95.0 | ASTM D1746 | |
| Haze (20.0 µm, Cast Film) | 3.0 | % | ASTM D1003 |
| Additional Information |
|---|
| Blow Up Ratio: 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SNOLEN® IM 8/51 | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| Thermoset Plastics EP-236 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| Zytel® 70G33HS1L NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| VAMPORAN 0024 V0 12 | Vamp Tech | PPE+PS | VAMPORAN |
| HiFill® PA6/6 GF/M40 B1 BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
