Order Products : sales@su-jiao.com
ADMER™ AT2717E
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 17CVHp_ADMER-AT2717E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADMER® AT2717E is a maleic anhydride grafted, PP-based grade with high bonding to PP, EVOH and PA, especially designed for blown and cast film structures with antifog additives*. *materiaI was tested with Constab AF0042PP antifog grade. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 22.0 | MPa | |
| Break | 26.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | 0.350 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 GR25 NL HS | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Edgetek™ PK-000/000 Natural | PolyOne Corporation | PEEK | Edgetek™ |
| KEBAFORM® C 901 MS | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| LNP™ STAT-KON™ PX93058 compound | SABIC Innovative Plastics Europe | Nylon 6 | LNP™ STAT-KON™ |
| LNP™ THERMOCOMP™ JX97000 compound | SABIC Innovative Plastics Europe | PESU | LNP™ THERMOCOMP™ |
