Order Products : sales@su-jiao.com
TechnoFin PP EPDM T 10
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | TechnoCompound GmbH |
| Trademark: | TechnoFin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 15OArG_TechnoFinPPEPDMT10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ranging from commodity to tailor-made compound |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (230°C/2.16 kg) | 10.0 | cm³/10min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 23.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1000 | MPa | ISO 527-2/1 |
| Tensile Stress | |||
| Yield | 17.0 | MPa | ISO 527-2/50 |
| Fracture | 18.9 | MPa | ISO 527-2/5 |
| Tensile Strain | |||
| Yield | 10 | % | ISO 527-2/50 |
| Fracture | 33 | % | ISO 527-2/5 |
| Flexural Modulus 1 | 1240 | MPa | ISO 178 |
| Flexural Stress 2 | 25.2 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 9.2 | kJ/m² | ISO 179/1eA |
| 23°C | 48 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | No Break | ISO 179/1eU | |
| 23°C | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 98.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 58.0 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adflex KS021P | LyondellBasell Industries | TPO (POE) | Adflex |
| INELEC PA12CF20 | Infinity LTL Engineered Compounds | Nylon 12 | INELEC |
| LNP™ STAT-KON™ DE0026E compound | SABIC Innovative Plastics Europe | PC | LNP™ STAT-KON™ |
| PLUSTEK RA303G50 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| ULTEM™ DT1810EV resin | SABIC Innovative Plastics | PEI | ULTEM™ |
