Order Products : sales@su-jiao.com
PermaStat® 2800-70A
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | PermaStat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 11bMWg_PermaStat-2800-70A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. ESD Protection - Permanently Anti-static |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.990 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.0 - 2.0 | % | ASTM D955 |
| Moisture Content | 0.030 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 4.14 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | > 300 | % | ASTM D412 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 1 | 1.0E+9 - 1.0E+12 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+8 - 1.0E+11 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 2.0 | hr | |
| Dew Point | -17.8 | °C | |
| Processing (Melt) Temp | 182 - 204 | °C | |
| Mold Temperature | 15.6 - 65.6 | °C | |
| Injection Pressure | 34.5 - 68.9 | MPa |
| Injection instructions |
|---|
| Do not exceed 520 °F (270 °C) melt temperature. |
| Note Message | |
|---|---|
| 1 . | ESD STM11.11 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nylene® NX4512 | Custom Resins Group | Nylon 6 | Nylene® |
| AKROMID® B3 GM 10/20 1 L black (4646) | AKRO-PLASTIC GmbH | Nylon 6+PP | AKROMID® |
| Hytrel® 5526 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| PLUSTEK PD305G6 | Polyram Ram-On Industries | Nylon 12 | PLUSTEK |
| ULTEM™ 2200R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
