Order Products : sales@su-jiao.com
EVATHENE® UE508
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | USI Corporation |
| Trademark: | EVATHENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 10lrbD_EVATHENE-UE508.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EVATHENE UE508 is an EVA copolymer especially developed for powder coating and hot melt adhesion for non-woven fabric. A combination of high flow and low melting temperature gives EVATHENE UE508 good processability for powder coating and easy ironing in adhesion applications. Strong adhesion of EVATHENE UE508 provides the excellent peel strength of non-woven fabric. EVATHENE UE508 also possesses excellent water resistance which makes the non-woven fabric adhered with EVATHENE UE508 better water repellent and less deformable and thus raises the value of its product. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 85 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 8.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 7.85 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 400 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 70.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 96.0 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VECTRA® E473i | Celanese Corporation | LCP | VECTRA® |
| Evoprene™ 689 | AlphaGary | SBS | Evoprene™ |
| Flontech® FT-COND2-2 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| INSULCAST® RTVS 11 | ITW Polymers Coatings North America | Silicone Rubber, RTV-2 | INSULCAST® RTVS |
| Resilience™ LS11170E | PolyOne Corporation | PVC, Rigid | Resilience™ |
