Order Products : sales@su-jiao.com
Nylene® 132 V0 30
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Custom Resins Group |
| Trademark: | Nylene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0v8QTf_Nylene-132-V0-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Nylene® 132 V0 30 is a Polyamide 66 (Nylon 66) material. It is available in North America for extrusion or injection molding. Important attributes of Nylene® 132 V0 30 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 63.7 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 3060 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 73.9 | °C | ASTM D648 |
| Melting Temperature | 263 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.762 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 to 82.2 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Suggested Shot Size | 25 to 75 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 260 to 282 | °C | |
| Middle Temperature | 271 to 293 | °C | |
| Front Temperature | 282 to 304 | °C | |
| Nozzle Temperature | 279 to 302 | °C | |
| Processing (Melt) Temp | 282 to 304 | °C | |
| Mold Temperature | 48.9 to 93.3 | °C | |
| Injection Pressure | 27.6 to 82.7 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 20.7 to 62.1 | MPa | |
| Back Pressure | 0.00 to 0.345 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moharamplast MDPE MP3840U | Moharamplast S.A.E | MDPE | Moharamplast MDPE |
| NuSil CV1-2289-1 | NuSil Technology | Silicone | NuSil |
| OnFlex™ S FR 80A-3S1892 | PolyOne Corporation | TPE | OnFlex™ |
| Paryls® mPPSU M1150 | Youju New Materials Co., Ltd. | PPSU, Modified | Paryls® |
| Lifoflex® UV FLAM 40600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
