Order Products : sales@su-jiao.com
Mytex® AN16L(W)-53
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0v1PoI_Mytex-AN16L-W--53.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Compounded polypropylene produced for automotive exterior applications using Mytex@ Technology. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 20 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 16.0 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 2 | 1150 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 550 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 70.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ PPR-20G Black | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| Rhelon X1003W-00 | RheTech, Inc. | Nylon 6 | Rhelon |
| Starex HR-0370F | SAMSUNG SDI CO., LTD. | ABS | Starex |
| UNITIKA Nylon 66 ET2025 | UNITIKA Plastics Division | Nylon 66 | UNITIKA Nylon 66 |
| ADEKA EP-4088S | Adeka Corporation | Epoxy | ADEKA |
