Sarlink® TPV 10045B BLACK (PRELIMINARY DATA) Datasheet,TPV,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink TPV 10045B BLACK is a high performance thermoplastic vulcanizate used in automotive applications. Sarlink TPV 10045B BLACK is a medium hardness, low density, lubricated, UV resistant grade exhibiting superior compression set and chemical resistance. This grade is designed for injection molding.

General Information
Features	Low Specific Gravity Low compressive deformability Low density Good UV resistance Good chemical resistance Heat resistance, high Lubrication Medium hardness
Uses	Application in Automobile Field Automotive exterior parts Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ISO 1183

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shaw A, 5 seconds, extruded	45	ISO 868
Shore A, 5 seconds, injection molding	48	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ISO 37
Transverse flow : 100% strain	2.00	MPa	ISO 37
Flow : 100% strain	1.20	MPa	ISO 37
Tensile Stress			ISO 37
Transverse flow : Fracture	2.90	MPa	ISO 37
Flow : Fracture	3.20	MPa	ISO 37
Tensile Elongation			ISO 37
Transverse flow : Fracture	280	%	ISO 37
Flow : Fracture	450	%	ISO 37
Tear Strength - Across Flow ¹	14	kN/m	ISO 34-1
Compression Set			ISO 815
23°C, 22 hr	17	%	ISO 815
70°C, 22 hr	24	%	ISO 815
125°C, 70 hr	46	%	ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air - Across Flow			ISO 188
135°C, 1008 hr	-10	%	ISO 188
100% strain 135°C, 1008 hr	2.0	%	ISO 188
150°C, 168 hr	-15	%	ISO 188
100% strain 150°C, 168 hr	-5.0	%	ISO 188
Changes in tensile stress upon fracture in air- Transverse flow			ISO 188
135°C, 1008 hr	-1.0	%	ISO 188
150°C, 168 hr	-10	%	ISO 188
Change in Shore Hardness in Air			ISO 188
Shao A, 135°C, 1008 hr	2.0		ISO 188
Shao A, 150°C, 168 hr	0.0		ISO 188
Change in Volume (125°C, 70 hr, in IRM 903 Oil)	78	%	ISO 1817

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	125	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	180 - 205	°C
Middle Temperature	180 - 205	°C
Front Temperature	180 - 205	°C
Nozzle Temperature	185 - 210	°C
Processing (Melt) Temp	185 - 210	°C
Mold Temperature	10 - 55	°C
Back Pressure	0.100 - 1.00	MPa
Screw Speed	100 - 200	rpm

Note Message
1 .	Method B, right-angle specimen (without cut)

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPV
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0tgW3N_SarlinkTPV10045BBLACKPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Sylvin 8240-90 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
WPP PP PPH5TF2-Natural	Washington Penn Plastic Co. Inc.	PP Homopolymer	WPP PP
Mylar® J (142 guage)	DuPont Teijin Films U.S.	PET	Mylar®
Petro Rabigh PP AV161	Rabigh Refining & Petrochemical Co.	PP Impact Copolymer	Petro Rabigh PP
Sylvin 8378-85 Orange 5112	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin