Order Products : sales@su-jiao.com

NuSil R32-2186

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0rLGId_NuSil-R32-2186.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Adhesives and Sealants Comments: Flowable, Fast Cure Adhesive, Longer Work Time

Message

As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.

Benefits of Silicone for Electronics:

Wide Operating Temperature Range of -115 °C to 250 °C

Low moisture absorption, < 0.4% Typical

Corrosion Resistance

High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm

Fillers can be added to provide thermal and electrical conductive properties

Low Modulus (Typically less than 5.5 MPa/800 psi)

Stable chemical and mechanical properties when exposed to high temperatures

Low Shrinkage

Available as gels, elastomers, film adhesives sheeting, and greases

General Purpose: Adhesives and Sealants

Comments: Flowable, Fast Cure Adhesive, Longer Work Time

General Information
Features	Fast Cure Good Corrosion Resistance Good Flow Good Thermal Stability Low Moisture Absorption Low Shrinkage
Uses	Adhesives Electrical/Electronic Applications Sealants

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-65 to 240	°C

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.12	g/cm³
Viscosity ¹	80	Pa·s
Curing Time (150°C)	0.25	hr
Pot Life	900	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	15
Lap Shear Strength ²	1.03	MPa
Tensile Strength	6.89	MPa
Tensile Elongation at Break	800	%
Tear Strength	21.9	kN/m
Electric Strength	36	kV/mm

Note Message
1 .	Part A
2 .	Primed with CF1-135

Resin Grade	Manufacturer	Category	Trademark
SOLLAMID B 2700 FV 40	Krisoll Resinas Plásticas Ltda.	Nylon 6	SOLLAMID
Geon™ HTX 66311	PolyOne Corporation	PVC Alloy	Geon™ HTX
Karina BEIGE COLOR CONCENTRATE 08/204-FC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Karina YELLOW PVC COMPOUND 550D02/101-AT-IS (***)	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Sylvin 4215-95 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin