Order Products : sales@su-jiao.com

Pro-fax 6301

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	LyondellBasell Industries
Trademark:	Pro-fax
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0qRcGa_Pro-fax-6301.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Pro-fax 6301 polypropylene homopolymer is available in spherical particle form. This resin is typically used for mixing with pigments and other additives to make polymer concentrates or masterbatches. Pro-fax 6301 has very minimal stabilization, which allows wide design latitude for compounders. Additional stabilization is required to protect the resin during melt processing and throughout its useful life. For regulatory compliance information see Pro-fax 6301 Product Stewardship Bulletin (PSB). Please note that any additives compounded into this resin will require a re-assessment of its FDA status.

Message

Pro-fax 6301 polypropylene homopolymer is available in spherical particle form. This resin is typically used for mixing with pigments and other additives to make polymer concentrates or masterbatches.

Pro-fax 6301 has very minimal stabilization, which allows wide design latitude for compounders. Additional stabilization is required to protect the resin during melt processing and throughout its useful life.

For regulatory compliance information see Pro-fax 6301 Product Stewardship Bulletin (PSB).

Please note that any additives compounded into this resin will require a re-assessment of its FDA status.

General Information
Features	Food Contact Acceptable General Purpose Good Stiffness Homopolymer
Uses	Compounding General Purpose Masterbatch
Forms	Spheres
Processing Method	Compounding Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	12	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	33.8	MPa	ASTM D638
Tensile Elongation (Yield)	10	%	ASTM D638
Flexural Modulus - 1% Secant ²	1450	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	32	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	93.3	°C	ASTM D648

Note Message
1 .	51 mm/min
2 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
Premier LH02019 - B	Premier Polymers, LLC.	LLDPE	Premier
Sumitomo PP FY3011E	Sumitomo Chemical Asia	PP Homopolymer	Sumitomo PP
Daicel PP PTS4N1	Daicel Polymer Ltd.	PP, Unspecified	Daicel PP
DENKA ABS GR-2000LG	Denka Company Limited	ABS	DENKA ABS
PLUSTEK PB300G5	Polyram Ram-On Industries	Nylon 6	PLUSTEK