Order Products : sales@su-jiao.com

DAI-EL™ G-802

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	DAIKIN AMERICA, INC.
Trademark:	DAI-EL™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0obDrX_DAI-EL-G-802.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DAI-EL G-802 is a peroxide curable copolymer with lower Mooney viscosity suitable for injection, transfer and compression molding. DAI-EL G-802 can be formulated with various peroxide cure systems to eliminate the need for post cure. DAI-EL G-802 provides superior mechanical properties and resistance to steam and aqueous solvents compared with bisphenol cured fluoroelastomers. DAI-EL G-802 may be used in compliance with 21 CFR 177.2600, Rubber articles intended for repeated use. Finished articles are required to comply with the end tests specified in 21 C.F.R 177.2600 (e) or (f), as applicable.

Message

DAI-EL G-802 is a peroxide curable copolymer with lower Mooney viscosity suitable for injection, transfer and compression molding. DAI-EL G-802 can be formulated with various peroxide cure systems to eliminate the need for post cure. DAI-EL G-802 provides superior mechanical properties and resistance to steam and aqueous solvents compared with bisphenol cured fluoroelastomers.

DAI-EL G-802 may be used in compliance with 21 CFR 177.2600, Rubber articles intended for repeated use. Finished articles are required to comply with the end tests specified in 21 C.F.R 177.2600 (e) or (f), as applicable.

General Information
Features	Copolymer Low Viscosity Solvent Resistant Steam Resistant
Uses	Gaskets Seals
Agency Ratings	FDA 21 CFR 177.2600
Appearance	Pink White
Processing Method	Compression Molding Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Specific Gravity	1.81	g/cm³
Mooney Viscosity (ML 1+10, 121°C)	20	MU
Fluorine Content	66	%

Thermal	Nominal Value	Unit
Low Temperature Brittleness	-25	°C

Hardness	Nominal Value	Unit
Durometer Hardness (Shore A)	< 66

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain, 25°C)	2.00	MPa
Tensile Strength (Yield, 25°C)	18.7	MPa
Tensile Elongation (Break, 25°C)	390	%
Compression Set (200°C, 70 hr)	27	%	ASTM D395

Resin Grade	Manufacturer	Category	Trademark
Sylvin 7868-95C Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
AMPLIFY™ IO 3701	The Dow Chemical Company	Ionomer	AMPLIFY™ IO
Axiall PVC 1651 Clear 7002	Axiall Corporation	PVC, Flexible	Axiall PVC
Daelim Po1y® PP-171	DAELIM INDUSTRIAL CO., LTD.	PP Homopolymer	Daelim Po1y®
Hostacom EKC 265N 2 D72792	LyondellBasell Industries	PP Copolymer	Hostacom