Neostar™ FN006 Datasheet,Copolyester Elastomer (Ether),Eastman Chemical Company-SHANGHAI SUSHENG

Neostar™ FN006

Wechat: WECHAT

Message
Eastman Neostar™ Elastomer FN006 is the second in Eastman's series of tough, clear, durable, general purpose grade copolyester ethers. Developed for use in the profile and automotive markets, it can also be used in packaging and tubing applications. Its chemical resistance, flexibility, and toughness make it an ideal choice for applications where strength, durability, and puncture resistance in harsh environments is required. Eastman Neostar™ Elastomer FN006 can be used in injection molding or cast film, blown film, or tubing extrusion applications. This copolyester has a full range of flexibility and memory without the addition of plasticizers. Considered environmentally preferred due to its non-halogenated material composition, it can be incinerated cleanly without the emission of toxic gases. The target inherent viscosity of this product is 1.6. This product has been CRADLE TO CRADLE CERTIFIED Silver. The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.

Message

Eastman Neostar™ Elastomer FN006 is the second in Eastman's series of tough, clear, durable, general purpose grade copolyester ethers. Developed for use in the profile and automotive markets, it can also be used in packaging and tubing applications. Its chemical resistance, flexibility, and toughness make it an ideal choice for applications where strength, durability, and puncture resistance in harsh environments is required. Eastman Neostar™ Elastomer FN006 can be used in injection molding or cast film, blown film, or tubing extrusion applications. This copolyester has a full range of flexibility and memory without the addition of plasticizers. Considered environmentally preferred due to its non-halogenated material composition, it can be incinerated cleanly without the emission of toxic gases. The target inherent viscosity of this product is 1.6.

This product has been CRADLE TO CRADLE CERTIFIED Silver.
The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.

General Information
Features	Durable General Purpose Good Chemical Resistance Good Dimensional Stability Good Flexibility Good Strength Good Toughness Halogen Free High Heat Resistance Puncture Resistant
Uses	Automotive Applications Cast Film Film General Purpose Packaging Profiles Tubing
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Blown Film Cast Film Injection Molding Profile Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.13	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	10	g/10 min	ASTM D1238
Water Absorption (23°C, 24 hr)	0.40	%	ASTM D570
Inherent Viscosity ¹(23°C)	1.2		Internal Method

Thermal	Nominal Value	Unit	Test Method
Heat of Fusion (23°C)	27.0	kJ/kg	ASTM E793

Additional Information	Nominal Value	Unit	Test Method
Tear Strength (23°C)	350	N	ASTM D1004

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 23°C	95
Shore D, 23°C	55

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	170	MPa	ASTM D638
Tensile Strength			ASTM D638
Yield, 23°C, 3.00 mm, Injection Molded ²	14.0	MPa
Break, 23°C, 2.00 mm ³	22.0	MPa
Tensile Elongation			ASTM D638
Yield, 23°C	38	%
Break, 23°C	400	%
Flexural Modulus (23°C)	150	MPa	ASTM D790

Elastomers	Nominal Value	Unit	Test Method
Clash-Berg Modulus			ASTM D1043
-70°C	930	MPa
-28°C	240	MPa

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-40°C)	40	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746
Glass Transition Temperature	-3.00	°C	DSC
Vicat Softening Temperature	170	°C	ASTM D1525 ⁴
Peak Melting Temperature	205	°C	ASTM D3418
Peak Crystallization Temperature (DSC)	140	°C	DSC
CLTE - Flow (23°C)	1.5E-4	cm/cm/°C	ASTM D696
Specific Heat			DSC
25°C ⁵	1600	J/kg/°C
100°C ⁶	1800	J/kg/°C
150°C ⁷	2000	J/kg/°C
175°C ⁸	2300	J/kg/°C
200°C ⁹	3100	J/kg/°C
225°C ¹⁰	2300	J/kg/°C
Thermal Conductivity (23°C)	0.19	W/m/K	ASTM C177

Note Message
1 .	EMN-A-AC-G-V-1
2 .	Type I, 500 mm/min
3 .	Type IV, 500 mm/min
4 .	Loading 1 (10 N)
5 .	Solid
6 .	Solid
7 .	Solid
8 .	Solid
9 .	Transition, apparent specific heat, including the effects of the heat of fusion.
10 .	Melt

Resin Grade	Manufacturer	Category	Trademark
Matrixx 14N6020	The Matrixx Group, Inc.	PP, Unspecified	Matrixx
Rhelon G1010-00	RheTech, Inc.	Nylon 6	Rhelon
Nypol® PA A3 G50 HS NTLA013 NR356	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA
Andur 70 DP/Curene® 442	Anderson Development Company	PUR-Ether/TDI	Andur
Sylvin 9077-80 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin

Resin Grade

Manufacturer

Category:	Copolyester Elastomer (Ether) , Copolyester Elastomer (Ether)
Manufacturer:	Eastman Chemical Company
Trademark:	Neostar™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0nwPEl_Neostar-FN006.pdf
PRICE:	Order Products email sales@su-jiao.com