Order Products : sales@su-jiao.com
Network Polymers HDPE 50 2053
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Network Polymers HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0nI8Z4_Network-Polymers-HDPE-50-2053.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Network Polymers HDPE 50 2053 is a High Density Polyethylene product. It is available in North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) 1(190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 300 | % | ASTM D638 |
| Flexural Modulus 4 | 965 to 1240 | MPa | ASTM D790B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.6 | °C | ASTM D746 |
| Vicat Softening Temperature | 122 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Type IV, 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | Method I (3 point load), 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ MX5200-5006 RS NATURAL | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| RTP 207.3 HS SI | RTP Company | Nylon 66 | RTP |
| RTP 381 TFE 5 | RTP Company | PC | RTP |
| Trexprene® A40NU | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| ESTADIENE 0615 HHT | Cossa Polimeri S.r.l. | ABS | ESTADIENE |
