Order Products : sales@su-jiao.com
PLUSTEK RB301G6
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | PLUSTEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0n1Esa_PLUSTEK-RB301G6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| INDUSTRIAL GRADE 30% GLASS-FIBER REINFORCED POLYAMIDE 6 FOR INJECTION MOULDING APPLICATIONS. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | |||
| Flow | 0.20 - 0.30 | % | ASTM D955 |
| -- | 0.20 - 0.30 | % | ISO 2577 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.90 | % | ASTM D570, ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | > 130 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | > 2.0 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | > 6500 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | > 200 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | > 80 | J/m | ASTM D256 |
| 23°C | > 8.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | > 210 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, not annealed | > 190 | °C | ASTM D648, ISO 75-2/A |
| Melting Temperature | 218 | °C | ISO 11357-3, ASTM D3418 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 | |
| FMVSS Flammability | 15 | mm/min | FMVSS 302 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Rear Temperature | 220 - 260 | °C | |
| Middle Temperature | 230 - 265 | °C | |
| Front Temperature | 250 - 270 | °C | |
| Mold Temperature | 55.0 - 95.0 | °C | |
| Injection Pressure | 70.0 - 105 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 30.0 - 70.0 | MPa | |
| Back Pressure | 0.350 - 0.700 | MPa | |
| Screw Speed | 60 - 90 | rpm |
| Injection instructions |
|---|
| Fill Speed: 50 to 75 mm/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1601 TFE 5 Z | RTP Company | PAS | RTP |
| TIPOLEN® FB 243-55 | MOL Petrochemicals Co. Ltd. | LDPE | TIPOLEN® |
| Lifoflex® GB 1090 | Müller Kunststoffe GmbH | SEBS | Lifoflex® |
| Macromeric® 0103-212b BK | Saco Polymers | Polyolefin, Unspecified | Macromeric® |
| Sylvin 9600-78 Clear Orange 573 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
