Order Products : sales@su-jiao.com

COPEC® CC8OCZ (Series: VS/AD1)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	COPEC®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0mGEqX_COPEC-CC8OCZ-Series-VS-AD1-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The VS/AD1 Series is your material solution for applications in the consumer electronics section. The compounds feature an exceptionally silky and velvety surface, accompanied by excellent adhesion properties to polar thermoplastics such as ABS, PC and PC/ABS.

Typical applications

Ear phones

Game consoles

Handles and grips for consumer applications

Remote controls

Seals

Material advantages

Easy coloring (compounds in natural colors)

Excellent color stability

Good weathering resistance

Insert molding possible

Pleasant surface feel (Soft touch)

Resistance against skin oil, sunscreens and olive oil

Smooth and silky surface

UL 94 HB listed

General Information
Features	Good Adhesion Good Color Stability Good Weather Resistance Oil Resistant Soft
Uses	Consumer Applications Electrical/Electronic Applications Handles Seals
Appearance	Black
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.31	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	76		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	7.50	MPa	ISO 37
Tensile Elongation ²(Break)	900	%	ISO 37
Tear Strength ³	31	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	18	%
70°C, 24 hr	57	%
100°C, 24 hr	69	%

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Additional Information	Nominal Value	Unit	Test Method
Adhesion to ABS	25.0	kN/m	Renault D41/1916
Adhesion to PC	40.0	kN/m	Renault D41/1916

Extrusion	Nominal Value	Unit
Drying Temperature	80.0	°C
Drying Time	4.0	hr
Suggested Max Moisture	0.020	%
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	180	°C
Cylinder Zone 3 Temp.	200	°C
Die Temperature	220	°C

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Medalist® MD-305	Teknor Apex Company	TPE	Medalist®
WPP PP PRC25TF4-Black B46211	Washington Penn Plastic Co. Inc.	PP Homopolymer	WPP PP
COSMOTHENE® F117-1	TPC, The Polyolefin Company (Singapore) Pte Ltd	LDPE	COSMOTHENE®
Diamond ASA S510	Network Polymers, Inc.	ASA	Diamond ASA
LEXAN™ 123R resin	SABIC Innovative Plastics	PC	LEXAN™