Order Products : sales@su-jiao.com
KW Plastics KW 622-30
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0kAKYW_KW-Plastics-KW-622-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Copolymer Polypropylene Post-Consumer Resin Injection Molding CHARACTERISTICS Good impact resistance. Available as mixed color and pre-colored black. |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 30 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 21.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 8.0 | % | ASTM D638 |
| Flexural Modulus | 896 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GN5002SF | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Moplen HP653P | PolyMirae | PP Homopolymer | Moplen |
| Xmod™ WD300UBB | Borealis AG | TPO | Xmod™ |
| ALTECH® PA66 A 2020/109 GF20 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| KRALASTIC® AN-435 | Nippon A&L Inc. | ABS | KRALASTIC® |
