Order Products : sales@su-jiao.com

ELASTOSIL® R 401/55

Category:	Silicone , Silicone
Manufacturer:	Wacker Chemie AG
Trademark:	ELASTOSIL® R
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0iO3tB_ELASTOSIL-R-401-55.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Silicone Rubber, HTV Vibration Dampers, Automotive & Transportation Exhaust-Pipe Suspensions, Automotive & Transportation Molded Seals, Plastics and Rubber Processing Extrudates, Automotive, Plastics and Rubber Processing Extrudates, food contact, Plastics and Rubber Processing Extrudates, Technical, Plastics and Rubber Processing Extruded parts; tap water and wastewater contact, Plastics and Rubber Processing Molded Parts, Automotive, Plastics and Rubber Processing Molded Parts, Food Contact, Plastics and Rubber Processing Molded Parts, Technical, Plastics and Rubber Processing Molded parts; tap water and wastewater contact, Plastics and Rubber Processing Sealant Profiles, Construction

Message

Silicone Rubber, HTV

Vibration Dampers, Automotive & Transportation
Exhaust-Pipe Suspensions, Automotive & Transportation
Molded Seals, Plastics and Rubber Processing
Extrudates, Automotive, Plastics and Rubber Processing
Extrudates, food contact, Plastics and Rubber Processing
Extrudates, Technical, Plastics and Rubber Processing
Extruded parts; tap water and wastewater contact, Plastics and Rubber Processing
Molded Parts, Automotive, Plastics and Rubber Processing
Molded Parts, Food Contact, Plastics and Rubber Processing
Molded Parts, Technical, Plastics and Rubber Processing
Molded parts; tap water and wastewater contact, Plastics and Rubber Processing
Sealant Profiles, Construction

General Information
Features	Food Contact Acceptable General Purpose
Uses	Automotive Applications Compounding Gaskets Potable Water Applications Profiles Seals Valves/Valve Parts Wire & Cable Applications
Processing Method	Calendering Compression Molding Extrusion Press Molding Profile Extrusion

Uncured Properties	Nominal Value	Unit	Test Method
Color	Clear/Transparent
Density	1.14	g/cm³	ISO 1183

Cured Properties	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	55		DIN 53505
Tensile Strength	11.0	MPa	DIN 53504
Tensile Elongation at Break	470	%	DIN 53504
Compression Set	35	%	DIN ISO 815-B
Tear Strength	23.0	kN/m	ASTM D624B
Rebound Resilience	59	%	DIN 53512

Resin Grade	Manufacturer	Category	Trademark
THERMOLAST® K TC6CSZ (Series: CS)	KRAIBURG TPE	TPE	THERMOLAST® K
Iupilon® TMB1412	Mitsubishi Engineering-Plastics Corp	PC+ABS	Iupilon®
OP - PEI 1000	Oxford Polymers	PEI	OP - PEI
Sylvin 8600-90 CLEAR	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
DOW™ HDPE DMDD-1210 NT 7	The Dow Chemical Company	HDPE	陶氏高密度聚乙烯