Monprene® CP-28128 X4 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene CP-28128 X4 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-28128 X4 is a low hardness, low density grade that exhibits excellent melt strength and flexibility characteristics. This grade is suitable for both injection molding and extrusion.

General Information
Features	Low compressive deformability Low density High tensile strength Workability, good Good formability Good melt strength Good flexibility Good tear strength Good coloring Good adhesion Low liquidity Good chemical resistance Good toughness Halogen-free Extended tensile rate Hardness, low Elastic
Uses	Handle Washer Pipe Pipe fittings Doors and Windows Seals Foam Soft handle General Rubber substitution Profile Knob
RoHS Compliance	RoHS compliance
Appearance	Available colors Clear/transparent Natural color
Forms	Particle
Processing Method	Extrusion cast film Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.878	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	2.5	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	30	ASTM D2240
Shore A, 5 seconds, injection molding	28	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Flow ¹			ASTM D412
100% strain	0.621	MPa	ASTM D412
300% strain	1.17	MPa	ASTM D412
Tensile Strength - Flow ²(Break)	10.1	MPa	ASTM D412
Tensile Elongation - Flow ³(Break)	860	%	ASTM D412

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	171 - 227	°C
Middle Temperature	171 - 227	°C
Front Temperature	171 - 227	°C
Nozzle Temperature	171 - 227	°C
Processing (Melt) Temp	171 - 227	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	171 - 227	°C
Cylinder Zone 2 Temp.	171 - 227	°C
Cylinder Zone 3 Temp.	171 - 227	°C
Cylinder Zone 4 Temp.	171 - 227	°C
Cylinder Zone 5 Temp.	171 - 227	°C
Die Temperature	171 - 227	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0g4QlR_MonpreneCP28128X4PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Tecodur® PB70 GR23 BK EF	Eurotec Engineering Plastics	PBT	Tecodur®
Sinvicomp SRF1711	Teknor Apex Asia Pacific PTE. LTD.	PVC, Rigid	Sinvicomp
Durethan® BKV 30 H2.0 EF DUS029 901510	LANXESS Corporation	Nylon 6	Durethan®
INEOS PP 200-CA70	INEOS Olefins & Polymers Europe	PP Random Copolymer	INEOS PP
LUVOCOM® 1105-8000	Lehmann & Voss & Co.	PEEK	LUVOCOM®