Body Double® Standard Set

Category:	Silicone , Silicone
Manufacturer:	Smooth-On, Inc
Trademark:	Body Double®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0e61RL_Body-Double-Standard-Set.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Body Double® is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model - far better detail than any alginate! One Casting or Many . . . For About The Same Price: unlike alginates, which are good for one only casting, Body Double® will last for many castings of almost any material including plaster, Matrix® Neo®, wax, resins (Smooth-Cast urethanes, polyester, etc.), low-temperature melt metal alloys, etc. The amount of Body Double® used per mold is less than most alginates, so the cost per mold is about the same. Body Double® is odorless and is ACMI rated non-toxic and skin safe. Adding HYPER-FOLIC® release additive to Body Double® silicone will create a self-releasing silicone which is easily removed from hair-covered body areas. Body Double® "Standard Set" for larger surface areas. Working time of 5 minutes and a demold time of 30 minutes. Body Double® "Fast Set" for fast turnaround. Working time of 90 seconds and a demold time of 5 minutes. *Depending on material temperature, ambient temperature and body temperature - see "Preparation" below for details.

Message

Body Double® is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model - far better detail than any alginate!

One Casting or Many . . . For About The Same Price: unlike alginates, which are good for one only casting, Body Double® will last for many castings of almost any material including plaster, Matrix® Neo®, wax, resins (Smooth-Cast urethanes, polyester, etc.), low-temperature melt metal alloys, etc. The amount of Body Double® used per mold is less than most alginates, so the cost per mold is about the same. Body Double® is odorless and is ACMI rated non-toxic and skin safe. Adding HYPER-FOLIC® release additive to Body Double® silicone will create a self-releasing silicone which is easily removed from hair-covered body areas.

Body Double® "Standard Set" for larger surface areas. Working time of 5 minutes and a demold time of 30 minutes*.
Body Double® "Fast Set" for fast turnaround. Working time of 90 seconds and a demold time of 5 minutes*.
*Depending on material temperature, ambient temperature and body temperature - see "Preparation" below for details.

General Information
Features	Low to No Odor Non-Toxic
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.17	g/cm³	ASTM D1475
Specific Volume	0.856	cm³/g	ASTM D1475
Viscosity	Brushable		ASTM D2393

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	1A:1B by volume or by weight

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	< 0.10	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	25		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	3.62	MPa	ASTM D412
Tensile Elongation (Break)	500	%	ASTM D412
Tear Strength ¹	7.01	kN/m	ASTM D624

Thermoset	Nominal Value	Unit	Test Method
Pot Life	5.0	min	ASTM D2471
Demold Time	30	min

Note Message
1 .	Die C

Resin Grade	Manufacturer	Category	Trademark
MARPOL® LDM 765	Marco Polo International, Inc.	LDPE	MARPOL®
Quadrant EPP TIVAR® PolySteel	Quadrant Engineering Plastic Products	UHMWPE	Quadrant EPP
AKROMID® B28 GM 10/20 1 LA black (4790)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
Bergadur™ PB400 G30 UF UV	PolyOne Corporation	PBT	Bergadur™
Carbotex KFN-30	Kotec Corporation	PC	Carbotex